DMM Dragonfly #2 Micro Cam – Trad Climbing Protection

Description

DMM weren’t going to release their Micro Cam to the climbing market until they were absolutely sure it was the best product out there. The Dragonfly Micro Cam fulfils everything they were hoping for in this field and even the size 1, which goes down to 7.8mm placements, is rated to 6kN. This means it isn’t just sanctioned for aid or cluster placements but is legitimate pro for trad free climbing. 

Dragonfly Micro Cams provide versatile protection for narrow cracks and pockets. The size 1 Dragonfly is our smallest certified climbing cam. The six cams in the range cover placements from 7.8mm – 28.3mm.

The same camming angle of 13.75°, as used with our Dragons, provides the optimum balance of holding power and range. You will appreciate the holding power of the TripleGrip lobes with their ‘raw alu’ surface, particularly on smooth rock types such as slate and limestone. The narrow head width and compact trigger allow the cams to be placed deep in small pockets.

 

DMM Dragonfly Micro Cam Features

• 13.75° Camming Angle – Optimum combination of holding power and range.
• Raw Alu Contact Surface – Increases coefficient of friction meaning cam is more likely to hold on smooth rock types. TripleGrip gives greater surface texture interaction and makes the cam less likely to walk and perform better in flared cracks.
• Flexible Cable Stem – minimises cam walking
• Narrow head – helps with small pin-scar and pocket placements
• Compact trigger – allows for deeper placements
• Extendable 11mm Dynatec sling – saves on excess quickdraws and you can extend either strand
• Compliment Dragon Cams – The sizes 4,5 and 6 compliment Dragon Cams sizes 00, 0 and 1

 

Specifications

Size	Colour	Strength	Weight	Range
#1	Green	6kN	55 grams	7.8-11mm
#2	Red	6kN	56 grams	8.7-12.9mm
#3	Gold	8kN	65 grams	10.2-15.2mm
#4	Blue	8kN	67 grams	12.1-17.9mm
#5	Silver	9kN	70 grams	15.1-22.5mm
#6	Purple	9kN	73 grams	19-28.3mm